Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Nakata, Hisakazu; Hayashi, Hirokazu; Amazawa, Hiroya; Sakai, Akihiro
JAEA-Technology 2017-031, 41 Pages, 2018/01
JAEA-Technology-2017-031.pdf:5.27MB
JAEA plans to install disposal facilities for radioactive waste arising from research institutes. It must meet the technical standards specified in the relevant rule. One technical standard is that the disposal facilities shall be performance so as not to be left with the voids after the backfilling with soil. Additionally, the rule also requires this radioactive waste be enclosed in a container in which no harmful voids remain. In order to contribute to the development of a method that adapts the disposal facilities to these technical standards, JAEA adopts a waste conditioning artifice that aims for reducing a quantity of voidage in each waste container by a vibration filling method using sandy soil, providing with average void ratios inside the disposal facilities being adequately controlled. In this reports, filling property tests are conducted in the light of filling sand characteristics, types of metal waste and vibration conditions.
Arai, Yasuo
Saishin Kaku Nenryo Kogaku; Kodoka No Genjo To Tembo, p.451 - 457, 2001/06
no abstracts in English
Kakehi, Isao;
JNC TN9400 2000-054, 84 Pages, 2000/04
JNC-TN9400-2000-054.pdf:7.15MB
This report describes accomplishment of the study on the quality of vipac (vibro-packed) oxide fuel obtained by pyrochemical processing (molten salt electrolytic processing). This study is intended to contribute to the design study of the pyro-reprocessing-vipac fuel recycling system of oxide fuel. In this study, vibro-packing experiment has been conducted using granular U0
obtained by molten salt electrolytic processing (cold experiment). The oxide pyro process developed by Research lnstitute of Atomic Reactors (RIAR) is the method in which the sintered oxide is electrically deposited on the cathode at approximately 600
C. 0xide granules for vipac fuel are obtained by crushing the oxide deposited on the cathode. This process is also developed as recycle process because it is capable of FP separation. Also in Japan, this process is studied as one of the new FBR fuel recycling systems. ln this study, we made an effort to clarify the mechanisms of vibro-packing of the electrically obtained granules, which influence on the effective parameters of vibro-packing density and fuel particles size distribution in the fuel cladding in case of non-sphere particles of the granules. As a result of the study, smear density of 75% and almost uniform distribution of U0 particles have been taken in the experiment, and much knowledge for the improvement of the vibro-packing quality has been found. And the possibility of the smear density over 80% and the uniform distribution of U0 particles has been suggested in this study.